Products

Atmospheric Corrosion Probes

The MetriCorr Atmospheric ER Probe can be applied in four different configurations:

As a stand-alone tool
Where the thickness loss is read spot-wise on a regular basis. Collected data can be transferred manually to the Webservice, or managed through the App as part of the Easy Test Station concept.

Combined with the ICL data logger
to provide continous (e.g. every 30 or 60 minutes) measurements of probe thickness. The combination of probe and data logger provides the fastest possible corrosion rate indication and can be used to correlate corrosion rate with plant operation data. The data logger with an 80 000 reading storage capacity, can be downloaded on a regular basis and the collected data subsequently transferred to the Webservice by manual upload.

Combined with the ICL data logger an a remote monitoring unit
such as the M-Link or Skywave units. In this configuration data are sent automatically by cellular service to the Webservice for direct display and analysis. A satellite communication version is available on request.

Combined with PLC or PC
according to customers specific requirement. In this configuration data are transmitted directly to the SCADA system for direct display and analysis.

Data sheet and downloads: